CARCASE HANDLING

CARCASE HANDLING SYSTEMS

A RUNDOWN OF THE CARCASE HANDLING SYSTEMS WE DESIGN AND BUILD
JUST SCROLL DOWN TO FIND THE SYSTEM THAT WILL SUIT YOUR SITUATION

A NEW TREE BRANCH SUPPORTED UNIT FOR EASY SUSPENDED CARCASE PREPARATION
WITHOUT THE RISK OF BACK STRAIN OR MUSCLE INJURY

Price: £190.00 PLUS CARRIAGE

The storage/transport mode, boom full retracted and winch handle reversed to minimise space taken up

The working mode, boom fully extended, winch handle in working position

With boom hook over a suitable branch, the winch is in a comfortable working position

All the advantages of a suspended bleed, with little operator physical effort

All the advantages of a suspended gralloch, clean, quick and with gravity to help

A clean carcase produced anywhere ready for the larder/chiller

CARCASE HANDLING SYSTEMS

UPDATED BALL HITCH MOUNTED HOIST, BASIC HOIST TO MAKE CARCASE HANDLING SAFER AND EASIER

Our tried and tested ball hitch hoist fits any 50mm ball hitch on any vehicle or ATV giving easy and safe handling of any size carcase by one person and can be used anywhere a vehicle or ATV can get. Can also be used at or in a building by simply bolting a 50mm ball to a wall

Price: £350.00

Fits any vehicle with 50mm ball

Dismantles without tools for stowage

A suspended bleed and gralloch anywhere on any surface

For transport Carcase on stowed on rear carrier, and hoist stowed on front carrier

CARCASE HANDLING SYSTEMS

BALL HITCH HOIST WITH SWIVEL TOP BOW

A DEVELOPMENT OF THE STANDARD BALL HITCH HOIST WITH A SWIVEL TO THE CENTRAL PILLAR TOP “BOW” SECTION WHICH ALLOWS THE CARCASE TO BE SAFELY LOADED INTO/ONTO THE VEHICLE IT IS ATTACHED TO.

Price: £400-00

Still fits any 50mm ball hitch with appropriate coupler

Still stows without tools for transport

Still takes the skinning attachment

Still fits any vehicle with 50mm ball hitch

with appropriate hitch coupler

Safe loading by one person into or onto the vehicle the hoist is attached to

CARCASE HANDLING SYSTEM

ASSEMBLY OF SWIVEL TOP HOIST TO DIFFERENT
50MM TOWBARS – IDEALLY SEND CLOSE UP PHOTO OF YOUR BALL HITCH WHEN ORDERING

If your drawbar is of this type, you need a type 2 coupler which fits as shown here

If your drawbar is of this type, you need a type 3 coupler which fits as shown here or offered from the side if the ball is too close to the bumper and then turned to the rear to fit the rest of the hoist

If your drawbar is of this type, you need a type 3 coupler which fits as shown here when the ball is close to the body and then turned to the rear to fit the rest of the hoist

CARCASE HANDLING SYSTEMS

ASSEMBLING THE HOIST AS DELIVERED

The components as unpacked the 2 items on the far left are the tray support if ordered

Fit handle to winch using allen key provided

Fit coupler to drawbar ball

If bumper blocks coupler handle, fit as shown then turn to rear

Coupler on ball and tray support
Fitted (if required)

Socket for feet and feet fitted

Fit centre pillar and then top bow section with winch but fit pulley at top of bow section first

COMPACT HOIST

A development of the standard hoist, to suit smaller vehicles and so to store in smaller spaces for transport, but still fits any vehicle with a 50mm ball and can accomplish all the jobs of the standard hoists, (except skinning large Red Deer) with the correct coupler for the drawbar involved.

AVAILABLE AS NON-SWIVEL AT: £35000

AND FULL SWIVEL VERSION AT: £400.00

Fits small family size car

Fits small 4 x 4 vehicles

Stows in small car boot

Stows on Quad carrier

All the benefits of a suspended bleed and gralloch anywhere

Cleanliness of a suspended gralloch

CARCASS HANDLING SYSTEMS
COMPACT HOIST

The optional tray support on the coupler bar price£25-00

The optional tray support on the coupler bar

The tray support on a vehicle without drop down tailgate

Tray on support bar on a vehicle with side opening rear door

Lowering carcase into tray on support bar

Takes the standard skinning attachment

A clean skinned carcase every time with little physical effort

CARCASS HANDLING SYSTEMS
VEHICLE MOUNTED HOIST

Bespoke vehicle hoist to handle any size deer carcase

Instant demount to leave vehicle completely clear for other use

Custom-built to suit any vehicle, secure rifle storage if needed

Custom built to suit any vehicle, still with instant dismount

Winch can pull tray and carcases into vehicle with no lifting

Unit can recover carcases even if vehicle cannot get alongside

CARCASS HANDLING SYSTEMS
A FREE STANDING “TILTING” CRADLE

A new concept in easy hygienic carcase preparation in the field or larder, all food grade stainless steel construction with built in zinc plated winch unit and stainless steel winch rope.

£400.00 plus carriage

The cradle assembled ready to use

Easily tilt to vertical to bleed

Easily tilt to horizontal to start a gralloch at a comfortable height

Easily tilt back to vertical to let gravity remove gralloch cleanly

Will put carcase into vehicle with little effort, preferably into a tray

Dismantles without tools to stow alongside carcase in tray

CARCASS HANDLING SYSTEMS
A TILTING CRADLE MODEL FOR QUAD BIKES

This version of the stainless tilting cradle clamps to the rear (or front) carrier of a quad to enable clean, easy and safe processing and transport of a deer carcase by one person.

£400.00 plus carriage

FOUR EASY STEPS FROM FIELD TO LARDER